Boardcon Idea6410 Manual de usuario descargar pdf (Pagina 3)

www.armdesigner.com

1. Wok Environment

Version: Android_V0.19

Linux Working Environment: Ubuntu-9.04

1.1. Install Cross-compile

. Open Android_v0.19\cross_compile\ to copy file:

arm-none-linux-gnueabi-arm-2008q3-72-for-linux.tar.bz2 to the place of running Linux PC.

Note that “/home/fusq/test” is working directory ( fusq is user name of linux PC).

. Under the directory /usr/local/arm,

install arm-none-linux-gnueabi-arm-2008q3-72-for-linux.tar.bz2.

The commend is: fusq@fusq-urbetter:～/test$

tar jxvf arm-none-linux-gnueabi-arm-2008q3-72-for-linux.tar.bz2 –C /

Note: The default path is /usr/local/arm/, do not need to assign again.

1.2. Check the complies installation status

Please see below picture-1

Picture-1

From above picture-1 arm-none-linux-gnueabi was successfully installed under the

directory /usr/local/arm/.

2. Compile u-boot

There are two kinds of u-boot, one is u-boot-movi.bin that is ported in SD card, another

one is u-boot-nand.bin that is ported in Nandflash for Nand Flash booting use.

2.1. Compile u-boot-movi.bin

The file u-boot-movi.bin is at the directory /image/, only providing bin file, no source code.

IDEA6410 Android User Manul

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

Boardcon Idea6410 Manual de usuario Pagina 3